Skip to main content
x

List of international publications

 

CITE

NOTE

2022

  1.  

Effects of the Gas Molecules (H2, CO, NO) and Transition Metal Atoms (Cr, Au) Adsorbed on Hexagonal Boron Nitride Layers

2021

  1.  

Edge defects inducing asymmetric transverse domain walls created in Ni80Fe20 nanowires

2021

  1.  

Geopolymer Recycled Aggregate Concrete: From Experiments to Empirical Models

2021

  1.  

Development of ensemble machine learning approaches for designing fiber-reinforced polymer composite strain prediction model

2021

  1.  

Mechanical Properties of High Strength Concrete Containing Nano SiO2 Made from Rice Husk Ash in Southern Vietnam

2021

  1.  

Plastic behaviors of asymmetric prismatic sand heaps on the verge of failure

2020

  1.  

Potential utilization of sugarcane bagasse ash for developing alkali-activated materials

2021

  1.  

Dynamic compressive properties of lightweight rubberized geopolymer concrete

2020

  1.  

A systematic analysis of the spatial migration patterns and the linkages between market components in Greater Manchester, United Kingdom

2021

  1.  

On Transforming Unused Urban Spaces to Social Housing for Self-Employed People in Ho Chi Minh City: An Architectural Space Design Proposal

2021

  1.  

A geometrically nonlinear Euler–Bernoulli beam model within strain gradient elasticity with isogeometric analysis and lattice structure applications

2020

  1.  

A New Development Model for Traditional Craft Villages in Urban Fringes: A Case Study in Ho Chi Minh City, Vietnam

 

  1.  

Detachable Web-Based Learning Framework to Overcome Immature ICT Infrastructure Toward Smart Education

2021

  1.  

Assessment of properties of mortars modified with sugarcane bagasse ash processed by heating at different temperatures as cement replacement

2021

  1.  

Compressive Strength Prediction Using Coupled Deep Learning Model with Extreme Gradient Boosting Algorithm: Environmentally Friendly Concrete Incorporating Recycled Aggregate

2022

  1.  

Deep Learning for Prediction of Water Quality Index Classification: Tropical Catchment Environmental Assessment

2021

  1.  

Arching effect in sand piles under base deflection using geometrically non-linear isogeometric analysis

2021

  1.  

Mechanical and durability properties of recycled aggregate concrete with ternary binder system and optimized mix proportion

2020

  1.  

A review of residual strength properties of normal and high strength concrete exposed to elevated temperatures: Impact of materials modification on behaviour of concrete composite

2021

  1.  

Efficient hydrogen evolution reaction in alkaline via novel hybrid of Pt deposited zinc phosphide nanosheets

2021

  1.  

Passive earth pressures with sloping backfill based on a statically admissible stress field

2022

  1.  

Free vibration and transient analysis of advanced composite plates using a new higher-order shear and normal deformation theory

2021

  1.  

Application of nanotechnology for earth materials: an exploratory study with graphene-based nanosheets

2022

  1.  

Fiber reinforced concrete for slabs without steel rebar reinforcement: assessing the feasibility for 3D-printed individual houses

2022

  1.  

Assessing influences of different factors on the compressive strength of geopolymer‑stabilised compacted earth

2022

  1.  

An overview of the remaining challenges of the RILEM TC 274‐TCE, testing and characterisation of earth‐based building materials and elements

2021

  1.  

Valorization of starch nanoparticles on microstructural and physical properties of PLA-starch nanocomposites

2021

  1.  

Evaluation of seismic performance of rammed earth building and improvement solutions

2021

  1.  

Earth as construction material in the circular economy context: practitioner perspectives on barriers to overcome

2021

  1.  

A novel direct SPT method to accurately estimate ultimate axial bearing capacity of bored PHC nodular piles with 81 case studies in Vietnam

2022

  1.  

Dynamic analysis of carbon nanotube reinforced composite plates by using Bézier extraction based isogeometric finite element combined with higher-order shear deformation theory

2020

  1.  

Isogeometric nonlinear bending and instability analysis of cylindrical composite shells reinforced with graphene platelets

2021

  1.  

Static bending and free vibration analysis of multilayered composite cylindrical and spherical panels reinforced with graphene platelets by using isogeometric analysis method

2020

  1.  

Bézier   extraction   based   isogeometric   analysis   for   bending   and   free  vibration   behavior  of   multilayered  functionally  graded   composite  cylindrical   panels  reinforced   with  graphene   platelets 

2020

  1.  

Isogeometric analysis of FG-CNTRC plates in combination with hybrid type higher-order shear deformation theory

2020

  1.  

Increasing durability of blended concrete using controlled-burning sugarcane bagasse ash as cement replacement

2022

  1.  

Performance of Self-compacting Concrete with Stainless Steel Slag Versus Fly Ash as Fillers: A Comparative Study

2021

  1.  

Predicting compressive strength of roller-compacted concrete pavement containing steel slag aggregate and fly ash

2020

  1.  

Isogeometric nonlinear bending and instability analysis of cylindrical composite shells reinforced with graphene platelets

2022

2021

  1. 1

Duc-Quang Hoang, Xuan-Huu Cao, Hoai-Thuong Nguyen, Vinh-Ai Dao. (2020). Journal of the Physical Society of Japan.

ISI (2020)

  1. 2

Duc-Quang Hoang, Xuan-Huu Cao, Hoai-Thuong Nguyen and Vinh-Ai Dao. (2020). Creation and propagation of a single magnetic domain wall in 2D nanotraps with a square injection pad. Nanotechnology.

ISI (12/2020)

  1. 3

B.H.Tran, B.V.Le, V.T.A.Phan, H.M.Nguyen. (2020). In-situ Fine Basalt Soil Reinforced by Cement Combined with Additive DZ33 to Construct Rural Roads in Gia Lai Province, Vietnam. International Journal of Engineering, Transactions B: Applications.

ISI (11/2020)

  1.  

Suraj Kumar Bhagat, Tiyasha Tiyasha, Salih Muhammad Awadh, Tran Minh Tung, Ali H. Jawad, Zaher Mundher Yaseen. (2021). Prediction of sediment heavy metal at the Australian Bays using newly developed hybrid artificial intelligence models. Environmental Pollution.

ISI (01/2021)

  1.  

Seyed Babak Haji Seyed Asadollah, Ahmad Sharafati, Davide Motta, Zaher Mundher Yaseen. (2021). River water quality index prediction and uncertainty analysis: A comparative study of machine learning models. Journal of Environmental Chemical Engineering.

ISI (02/2021)

  1.  

Marc Agenis-Nevers, Neeraj Dhanraj Bokde, Zaher Mundher Yaseen. (2021). An empirical estimation for time and memory algorithm complexities: newly developed R package. Multimedia Tools and Applications.

ISI (09/2020)

  1.  

Sinan Q. Salih, Maria Habib, Ibrahim Aljarah, Hossam Faris, Zaher Mundher Yaseen. (2020). An evolutionary optimized artificial intelligence model for modeling scouring depth of submerged weir. Engineering Applications of Artificial Intelligence.

ISI (11/2020)

  1.  

Anurag Malik· Anil Kumar· Ozgur Kisi· Najeebullah Khan· Sinan Q. Salih· Zaher Mundher Yaseen. (2020). Analysis of dry and wet climate characteristic at Uttarakhand (India) using effective drought index. Natural Hazards.

ISI (10/2020)

  1.  

Morteza Mohsenipour, Shamsuddin Shahid, Ghaith Falah Ziarh, Zaher Mundher Yaseen. (2020). Changes in monsoon rainfall distribution of Bangladesh using quantile regression model. Theoretical and Applied Climatology.

ISI (09/2020)

  1.  

Maryam Bayatvarkeshi, Monzur Alam Imteaz, Ozgur Kisi, Mahtab Zarei, Zaher Mundher Yaseen. (2020). Application of M5 model tree optimized with Excel Solver Platform for water quality parameter estimation. Environmental Science and Pollution Research.

ISI (10/2020)

  1.  

Rakhimova, N. R., Rakhimov, R. Z. (2018). Reaction products, structure and properties ofalkali-activated metakaolin cements incorporatedwith supplementary materials - a review. Journal of Materials Research and Technology.

ISI (03/2019)

  1.  

Rakhimova, N. R., Rakhimov, R. Z. (2019). Toward clean cement technologies: A review on alkali-activated fly-ash cements incorporated with supplementary materials. Journal of Non-Crystalline Solids.

ISI (04/2019)

  1.  

Bakhtiar Karimia,⁎, Parva Mohammadib, Hadi Sanikhania, Sinan Q. Salihc, Zaher Mundher Yaseen. (2020). Modeling wetted areas of moisture bulb for drip irrigation systems: An enhanced empirical model and artificial neural network. Computers and Electronics in Agriculture.

ISI (11/2020)

  1.  

Tiziano Boschetti, Salih Muhammad Awadh, Heba Sadoon Al-Mimar, Paola Iacumin, Lorenzo Toscani, Enricomaria Selmo, Zaher Mundher Yaseen. (2020). Chemical and isotope composition of the oilfield brines from Mishrif Formation (southern Iraq): Diagenesis and geothermometry. Marine and Petroleum Geology.

ISI (12/2020)

  1.  

Ahmad Sharafati, Mohammad Reza Khazaei, Mohamed Salem Nashwan, Nadhir Al-Ansari, Zaher Mundher Yaseen and Shamsuddin Shahid. (2020). Assessing the Uncertainty Associated with Flood Features due to Variability of Rainfall and Hydrological Parameters. Advances in Civil Engineering.

ISI (08/2020)

  1.  

Ahmad Sharafati, Seyed Babak Haji Seyed Asadollah, Davide Motta and Zaher Mundher Yaseen. (2020). Application of newly developed ensemble machine learning models for daily suspended sediment load prediction and related uncertainty analysis. Hydrological Sciences Journal.

ISI (07/2020)

  1.  

Asaad M. Armanuos, Nadhir Al-Ansari and Zaher Mundher Yaseen. (2020). Underground Barrier Wall Evaluation for Controlling Saltwater Intrusion in Sloping Unconfined Coastal Aquifers. Water (Switzerland).

ISI (08/2020)

  1.  

Tiyasha⁎, Tran Minh Tung, Zaher Mundher Yaseen. (2020). A survey on river water quality modelling using artifcial intelligence
models: 2000–2020
. Journal of Hydrology.

ISI (06/2020)

  1.  

Suraj Kumar Bhagat** ,Tran Minh Tung, Zaher Mundher Yaseen*. (2020). Development of artificial intelligence for modeling wastewater heavy metal removal: State of the art, application assessment and possible future research. Journal of Cleaner Production.

ISI (03/2020)

  1.  

Suraj Kumar Bhagat* ,Tran Minh Tung, Zaher Mundher Yaseen*. (2021). Heavy metal contamination prediction using ensemble model: Case study of
Bay sedimentation, Australia
. Journal of Hazardous Materials.

ISI (02/2021)

  1.  

Neeraj Dhanraj Bokde, Zaher Mundher Yaseen and Gorm Bruun Andersen. (2020). ForecastTB An R Package as a Test-Bench for Time Series Forecasting Application of Wind Speed and Solar Radiation Modeling. Energies.

ISI (05/2021)

  1.  

Ravinesh C. Deo, Zaher Mundher Yaseen, Nadhir Al-Ansari, Thong Nguyen-Huy, Trevor Ashley Mcpherson Langlands, Linda Galligan.(2020). Modern Artificial Intelligence Model Development for Undergraduate Student Performance Prediction: An Investigation on Engineering Mathematics Courses. IEEE Access.

ISI (07/2021)

  1.  

Mehdi Jamei, Iman Ahmadianfar, Xuefeng Chu, Zaher Mundher Yaseen. (2020). Prediction of surface water total dissolved solids using hybridized waveletmultigene genetic programming: New approach. Journal of Hydrology.

ISI (10/2020)

  1.  

Sinan Q. Salih, Intisar Alakili, Ufuk Beyaztas, Shamsuddin Shahid, Zaher Mundher Yaseen. (2020). Prediction of dissolved oxygen, biochemical oxygen demand, and chemical oxygen demand using hydrometeorological  variables: case study of Selangor River, Malaysia. Environment, Development and Sustainability.

ISI (08/2020)

  1.  

Guangnan Zhang, Zainab Hasan Ali, Mohammed Suleman Aldlemy, Mohamed H. Mussa, Sinan Q. Salih, Mohammed Majeed Hameed, Zainab S. Al‑Khafaji, Zaher Mundher Yaseen. (2020). Reinforced concrete deep beam shear strength capacity modelling using an integrative bio‑inspired algorithm with an artificial intelligence model. Engineering with Computers.

ISI (08/2020)

  1.  

Suraj Kumar Bhagat, Tiyasha Tiyasha, Tran Minh Tung, Reham R. Mostafa, Zaher Mundher Yaseen. (2020). Manganese (Mn) removal prediction using extreme gradient model. Ecotoxicology and Environmental Safety.

ISI (11/2020)

  1.  

Anurag Malik, Anil Kumar, Sinan Q. Salih, Sungwon Kim, Nam Won Kim, Zaher Mundher Yaseen, Vijay P. Singh. (2020). Drought index prediction using advanced fuzzy logic model: Regional case study over Kumaon in India. Plos One.

ISI (05/2020)

  1.  

Ahmad Sharafati, Masoud Haghbin, Mohammed Suleman Aldlemy, Mohamed H. Mussa, Ahmed W. Al Zand, Mumtaz Ali, Suraj Kumar Bhagat, Nadhir Al-Ansari and Zaher Mundher Yaseen. (2020). Development of Advanced Computer Aid Model for Shear Strength of Concrete Slender Beam Prediction. Applied Sciences-Basel.

ISI (05/2020)

  1.  

Anurag Malik, Priya Rai, Salim Heddam , Ozgur Kisi, Ahmad Sharafati, Sinan Q. Salih, Nadhir Al-Ansari and Zaher Mundher Yaseen. (2020). Pan Evaporation Estimation in Uttarakhand and Uttar Pradesh States, India: Validity of an Integrative Data Intelligence Model. Atmosphere.

ISI (05/2020)

  1.  

Ahmad Sharafati, Masoud Haghbin, Seyed Babak Haji Seyed Asadollah, Nand Kumar Tiwari, Nadhir Al-Ansari and Zaher Mundher Yaseen. (2020). Scouring Depth Assessment Downstream of Weirs Using Hybrid Intelligence Models. Applied Sciences-basel.

ISI (05/2020)

  1.  

Ahmed Mohammed Sami Al-Janabi, Abdul Halim Ghazali, Badronnisa Yusuf, Saad Sh. Sammen, Haitham Abdulmohsin Afan, Nadhir Al-Ansari, Shamsuddin Shahid and Zaher Mundher Yaseen. (2020). Optimizing Height and Spacing of Check Dam System for Better Grassed Channel Infiltration Capacity. Applied Sciences-basel.

ISI (05/2020)

  1.  

Suhong Liu, Haitham Abdulmohsin Afan, Mohammed Suleman Aldlemy, Nadhir Al-Ansari, Zaher Mundher Yaseen. (2020). Energy analysis using carbon and metallic oxides-based nanomaterials inside a solar collector. Energy Reports.

ISI (11/2020)

  1.  

Zaher Mundher Yaseen & Shabnam Naghshara& Sinan Q. Salih & Sungwon Kim4& Anurag Malik & Mohammad Ali Ghorbani. (2020). Lake water level modeling using newly developed hybrid data intelligence model. Theoretical and Applied Climatology.

ISI (06/2020)

  1.  

Jianwei Tian, Chongchong Qi, Yingfeng Sun, Zaher Mundher Yaseen. (2020). Surrogate permeability modelling of low-permeable rocks using convolutional neural networks. Computer Methods in Applied Mechanics and Engineering.

ISI (07/2020)

  1.  

Asaad M. Armanuos, Nadhir Al-Ansari and Zaher Mundher Yaseen. (2020). Cross Assessment of Twenty-One Different Methods for Missing Precipitation Data Estimation. Atmosphere.

ISI (04/2020)

  1.  

Saleem A. Salman, Shamsuddin Shahid, Haitham Abdulmohsin Afan, Mohammed Sanusi Shiru , Nadhir Al-Ansari and Zaher Mundher Yaseen. (2020). Changes in Climatic Water Availability and Crop Water Demand for Iraq Region. Sustainability.

ISI (04/2020)

  1.  

Hai Tao, Sinan Q. Salih, Mandeep Kaur Saggi, Esmaeel Dodangeh, Cyril Voyant, Nadhir Al-Ansari, Zaher Mundher Yaseen, And Shamsuddin Shahid. (2020). A Newly Developed Integrative Bio-Inspired Artificial Intelligence Model for Wind Speed Prediction. IEEE Access.

ISI (04/2020)

  1.  

Ahmad Sharafati; Zaher Mundher Yaseen; and Elnaz Pezeshki. (2020). Strategic Assessment of Dam Overtopping Reliability Using a Stochastic Process Approach. Journal of Hydrologic Engineering

ISI (07/2020)

  1.  

Hai Chien Pham, Quoc-Bao Ta, Jeong-Tae Kim, Duc-Duy Ho, Xuan-Linh Tran,  Thanh-Canh Huynh. (2020). Bolt-Loosening Monitoring Framework Using an Image-Based Deep Learning and Graphical Model. Sensors.

ISI (06/2020)

  1.  

H.B. Le, Q.B. Bui. (2020). Recycled aggregate concretes – A state-of-the-art from the microstructure to the structural performance. Construction and Building Materials.

ISI (10/2020)

  1.  

L.N.T. Mai, V.T. Pham, Q.B. Bui, H.T. Nhac-Vu. (2020). Iron sulfide nanosheets supported 3D foam: A binder-free electrocatalyst for sensitive and selective electrochemical H2O2 detection. Colloids and Surfaces A: Physicochemical And Engineering Aspects.

ISI (09/2020)

  1.  

D.M. Nguyen, T.N. Vu, T.M.L. Nguyen, T.D. Nguyen, C.N.Ha Thuc, Q.B. Bui, J. Colin, P. Perré. (2020). Synergistic Influences of Stearic Acid Coating and Recycled PET Microfibers on the Enhanced Properties of Composite Materials. Materials.

 

ISI (03/2020)

  1.  

D. M. Nguyen, A.C. Grillet, T. M. H. Diep, Q. B. Bui, M. Woloszyn. (2020). Characterization of hygrothermal insulating biomaterials modified by inorganic adsorbents. Heat and Mass Transfer/Waerme- und Stoffuebertragung.

ISI (05/2020)

  1.  

Thong, M. P., Wensu, C., Abdul, M. K., Hong, H., Mohamed, E., Tung, M. T. (2020). Dynamic compressive properties of lightweight rubberized concrete. Construction and Building Materials.

ISI (03/2020)

  1.  

Bui, Q. B., Bui, T. T., Jaffré, M., Teytu, L. (2020). Steel nail embedded in rammed earth wall to support vertical loads: an investigation. Construction and Building Materials.

ISI (02/2020)

  1.  

Mai, L. N. T., Tran, T. H., Bui, Q. B., Nhac-Vu, H. T. (2019). A novel nanohybrid of gold nanoparticles anchored copper sulfide nanosheets as sensitive sensor for nonenzymatic glucose detection. Colloids and Surfaces A: Physicochemical and Engineering Aspects.

ISI (12/2019)

  1.  

Mai, L. N. T., Bui, Q. B., Bach, L. G., Nhac-Vu, H. -T. (2020). A novel nanohybrid of cobalt oxide-sulfide nanosheets deposited threedimensional foam as efficient sensor for hydrogen peroxide detection. Journal of Electroanalytical Chemistry 857.

ISI (01/2020)

  1.  

Pham, T.M., Elchalakani, M., Hao, M., Lai, J., Ameduri, S., Tran.T.M. (2019). Durability Characteristics of Lightweight Rubberized Concrete. Construction and Building Materials.

ISI (11/2019)

  1.  

N. Dao, T. Nguyen, M. Luong, T. Nguyen-Thanh, W. Na and S. Cho. (2020). Self-Calibrated Edge Computation for Unmodeled Time-Sensitive IoT Offloading Traffic. IEEE Access.

ISI (06/2020)

  1.  

Huynh. T. T-M., Dang. C. N., Hoai. L. L-, Pham. A-D., Nguyen. T. D. (2020). Proposing a strategy map for coastal urban project success using the balanced scorecard method. Engineering, Construction and Architectural Management.

ISI (05/2020)

  1.  

Do. S. T., Nguyen. V. T., Dang. C. D. (2021). Exploring the relationship between failure factors and stakeholder coordination performance in high-rise building projects: empirical study in the finishing phase. Engineering, Construction and Architectural Management.

ISI (03/2021)

  1.  

Dang. C. N., Chih. Y. Y., Hoai. L. L-, Nguyen. L. D. (2020). Project-Based A/E/C Firms ’ Knowledge Management Capability and Market Development Performance: Does Firm Size Matter. Journal of Construction Engineering and Management (ASCE).

ISI (11/2020)

  1.  

Vo. K. D., Dang. C. N., Nguyen. C. V., Hoang. H. T., Nguyen. A. T., Nguyen. Q. K, Hoai. L. L-. (2020). Application of Information and Communication Technology in Construction Companies in Vietnam. Lecture Notes in Civil Engineering.

Conference paper

(07/2020)

  1.  

Vo. K. D., Do. S. T., Nguyen. T. A., Dang. C. N., Tran. T. H., Hoai. L. L-. (2020). Investigating Partnering Performance in the Vietnamese Construction Industry. Lecture Notes in Civil Engineering.

Conference paper

(07/2020)

  1.  

Alshurideh. M., Kurdi. B. A., Salloum. S. A., Arpaci. I., Mostafa. A-E. (2019). Predicting the actual use of m-learning systems: a comparative approach using PLS-SEM and machine learning algorithms. Interactive Learning Environments.

ISI (12/2019)

  1.  

Mostafa. A-E., Rana. A-M., Mohammed A. A-S. & Ibrahim. A. (2020). What impacts learning with wearables? An integrated theoretical model. Interactive Learning Environments.

ISI (04/2020)

  1.  

Mostafa A-E., Andrina. G., Mohammed. A. A-S., Nisreen. A., Mohamed. S. (2020). Examining the roles of students’ beliefs and security concerns for using smartwatches in higher education. Journal of Enterprise Information Management.

ISI (09/2020)

  1.  

Ibrahim. A., Shadi. A., Mostafa. A-E., Mahmoud. K., Ibrahim. M., Thabet. A., Aboul. E. H. (2020). Analysis of Twitter Data Using Evolutionary Clustering during the COVID-19 Pandemic. CMC-Computers, Materials & Continua.

ISI (07/2020)

  1.  

Karrar. A-S., Mostafa. A-E., Ramayah. T., Eimad. A. (2020). Developing a general extended UTAUT model for M-payment adoption. Technology in Society.

ISI (08/2020)

  1.  

Qaysi. N. A-., Nordin. N. M-., Mostafa. A-E. (2020). Employing the technology acceptance model in social media: A systematic review. Education and Information Technologies.

ISI (05/2020)

2020

  1. 1

Bui, T-L., Bui, T-T., Bui, Q-B., Nguyen, X-H., Limam, A. (2020). Out-of-plane behavior of rammed earth walls under seismic loading: Finite element simulation. Structures.

ISI (04/2020)

  1. 2

Mai, N. T. L., Bach, L. G., Nhac-Vu, H. –T., Bui, Q. B. (2020). Hierarchical star-like molybdenum phosphides nanostructures decorated graphene on 3D foam as self-supported electrocatalyst for hydrogen evolution reaction. Solid State Sciences.

ISI (03/2020)

  1.  

Bui, Q. B., Bui, T. T., Jaffré, M., Teytu, L. (2020). Steel nail embedded in rammed earth wall to support vertical loads: an investigation. Construction and Building Materials.

ISI (02/2020)

  1.  

Mai, L. N. T., Bui, Q. B., Bach, L. G., Nhac-Vu, H. -T. (2020). A novel nanohybrid of cobalt oxide-sulfide nanosheets deposited threedimensional foam as efficient sensor for hydrogen peroxide detection. Journal of Electroanalytical Chemistry 857.

ISI (01/2020)

  1.  

Thong, M. P., Wensu, C., Abdul, M. K., Hong, H., Mohamed, E., Tung, M. T. (2020). Dynamic compressive properties of lightweight rubberized concrete. Construction and Building Materials.

ISI (03/2020)

  1.  

Thi, M.L.N, Pham, V.T, Bui, Q.B, Ai-Le, P.H, Nhac-Vu, H.T. (2020). Novel nanohybrid of blackberry-like gold structures deposited graphene as a free-standing sensor for effective hydrogen peroxide detection. Journal of Solid State Chemistry 286.

ISI (06/2020)

  1.  

Mai, N.T.L, Bach, L.G, Bui, Q.B, Nhac-Vu, H.T. (2020). Ultra-small platinum nanoparticles deposited graphene supported on 3D framework as self-supported catalyst for methanol oxidation. Synthetic Metals 263.

ISI (05/2020)

  1.  

Mostafa, A-E., Ibrahim, A., Said, A.S. (2020). An empirical examination of continuous intention to use m-learning: An integrated model. Education and Information Technologies.

Scopus (01/2020)

  1.  

Noor, A-Q., Norhisham, M-N., Mostafa, A-E. An empirical investigation of students’ attitudes towards the use of social Media in Omani Higher Education. Advances in Intelligent Systems and Computing.

International Conference

  1.  

Mostafa, A-E., Vitaliy, M. (2019). Examining the Effect of Knowledge Management Factors on Mobile Learning Adoption Through the Use of Importance-Performance Map Analysis (IPMA). Advances in Intelligent Systems and Computing.

International Conference

  1.  

Muhammad, A., Said, A. S., Barween, A. K., Mostafa, A-E. (2019). Factors affecting the Social Networks Acceptance: An Empirical Study using PLS-SEM Approach. ACM International Conference Proceeding Series.

International Conference

  1.  

Said, A. S., Mostafa, A-E., Mohammed, H., Mahmoud, A., Mazuri, A. G., Khaled, S. (2019). Understanding the Impact of Social Media Practices on E-Learning Systems Acceptance. Advances in Intelligent Systems and Computing.

International Conference

  1.  

Alamgir, M., Khan, N., Shahid, S., Yaseen, Z. M., Dewan, A., Hassan, Q., Rasheed, B. (2020). Evaluating severity–area–frequency (SAF) of seasonal droughts in Bangladesh under climate change scenarios. Stochastic Environmental Research and Risk Assessment.

ISI (02/2020)

  1.  

Yaseen, Z. M., Faris, H. & Al-Ansari, N. (2020). Hybridized Extreme Learning Machine Model with Salp Swarm Algorithm: A Novel Predictive Model for Hydrological Application. Complexity.

ISI (02/2020)

  1.  

Hai, T., Sharafati, A., Mohammed, A., Salih, S. Q., Deo, R. C., Al-Ansari, N., & Yaseen, Z. M. (2020). Global Solar Radiation Estimation and Climatic Variability Analysis Using Extreme Learning Machine Based Predictive Model. IEEE Access.

ISI (02/2020)

  1.  

Fu, M., Fan, T., Ding, Z., Salih, S. Q., Al-Ansari, N., &, Yaseen, Z. M. (2020). Deep Learning Data-Intelligence Model Based on Adjusted Forecasting Window Scale: Application in Daily Streamflow Simulation. IEEE Access.

ISI (02/2020)

  1.  

Yaseen, Z.M., Ali, Z.H., Salih, S.Q. & Al-Ansari, N. (2020). Prediction of Risk Delay in Construction Projects Using a Hybrid Artificial Intelligence Model. Sustainability.

ISI (02/2020)

  1.  

Yaseen, Z.M., Ameen, A.M.S, Aldlemy, M.S., Ali, M., Afan, H.A., Zhu, S., Al-Janabi, A.M.S., Al-Ansari, N., Tiyasha, T. & Tao, H. (2020). State-of-the Art-Powerhouse, Dam Structure, and Turbine Operation and Vibrations. Sustainability.

ISI (02/2020)

  1.  

Yaseen, Z. M., Naganna, S. R., Sa’adi, Z., Samui, P., Ghorbani, M.A., Salih, S.Q., Shahid, S. (2020). Hourly River Flow Forecasting: Application of Emotional Neural Network Versus Multiple Machine Learning Paradigms. Water Resources Management.

ISI (01/2020)

  1.  

Ehteram, M., Sinan Q. Salih, S.Q. & Yaseen, Z.M. (2020). Efficiency evaluation of reverse osmosis desalination plant using hybridized multilayer perceptron with particle swarm optimization. Environmental Science and Pollution.

ISI (02/2020)

  1.  

Diop, L., Samadianfard, S., Bodian, A., Yaseen, Z.M., Ghorbani, M.A., Salimi, H.,Rainfall, A. (2020). Forecasting Using Hybrid Artificial Intelligence Model: Integration of Multilayer Perceptron with Whale Optimization Algorithm. Water Resources Management.

ISI (01/2020)

  1.  

Pham, H.C., Dao, N-N., Kim, J-U., Cho, S., & Park, C-S. (2018). Energy-Efficient Learning System Using Web-Based Panoramic Virtual Photoreality for Interactive Construction Safety Education. Sustainability.

ISI (07/2018)

  1.  

Ngo, L-H., Kieu, L.T., Hoang, H-Y., Nguyen, H-B. (2020). Experiences of Housing Adapted to Sea Level Rise and Applicability for Houses in Can Gio District, Ho Chi Minh City, Vietnam. Sustainability.

ISI (05/2020)

  1.  

Qi, Q., Zhou, W., Lu, X., Luo, H., Pham, P.T., Yaseen, Z.M. (2020). Particulate matter concentration from open-cut coal mines: A hybrid machine learning estimation. Environmental Pollution.

ISI (08/2020)

  1.  

Bokde, N., Feijóo, A., Al-Ansari, N., Tao, S. and Yaseen, Z.M. (2020). The Hybridization of Ensemble Empirical Mode Decomposition with Forecasting Models: Application of Short-Term Wind Speed and Power Modeling. Energies.

ISI (04/2020)

  1.  

Armanuos, A.M., Al-Ansari, N. and Yaseen, Z.M. (2020). Assessing the Effectiveness of Using Recharge Wells for Controlling the Saltwater Intrusion in Unconfined Coastal Aquifers with Sloping Beds: Numerical Study. Sustainability.

ISI (03/2020)

  1.  

Mussa, M.H., Abdulhadi, A.M., Imad Shakir Abbood, Azrul A. Mutalib and Yaseen, Z.M. (2020). Late Age Dynamic Strength of High-Volume Fly Ash Concrete with Nano-Silica and Polypropylene Fibres. Crystals.

ISI (03/2020)

  1.  

S.I. Abbaa, Sinan Jasim Hadib, Saad Sh. Sammenc, Sinan Q. Salihd,e, R.A. Abdulkadirf, Quoc Bao Phamg, Yaseen, Z.M. (2020). Evolutionary computational intelligence algorithm coupled with self-tuning predictive model for water quality index determination. Journal of Hydrology

ISI (08/2020)

  1.  

Al-Janabi, A.M.S., Ghazali, A.H., Ghazaw, Y.M., Afan, H.A., Al-Ansari, N. and Yaseen, Z.M. (2020). Experimental and Numerical Analysis for Earth-Fill Dam Seepage. Sustainability.

ISI (03/2020)

  1.  

Do, V.N.V., Ong, T.H., Lee, C-H. (2019). Isogeometric analysis for nonlinear buckling of FGM plates under various types of thermal gradients. Thin-Walled Structures.

ISI (04/2019)

  1.  

Do, V.N.V., Lee, C-H. (2019). Free   vibration   analysis   of   FGM   plates   with   complex   cutouts   by   using  quasi-3D   isogeometric   approach. International   Journal   of   Mechanical   Sciences.

ISI (08/2019)

  1.  

Do, V.N.V., Lee, C-H. (2019). Quasi-3D   isogeometric   buckling   analysis   method   for   advanced composite   plates   in   thermal   environments. Aerospace Science and Technology.

ISI (09/2019)

  1.  

Do, V.N.V., Lee, C-H. (2019). Mesh-free thermal buckling analysis of multilayered composite plates based on an nth-order shear deformation theory. Composite Structures.

ISI (09/2019)

  1.  

Do, V.N.V., Lee, C-H. (2019). A new nth-order shear deformation theory for isogeometric thermal buckling analysis of FGM plates with temperature-dependent material properties. Acta Mechanica.

ISI (10/2019)

 

 

 

2019

  1.  

Maneva, R. L., Kravets, O. J., Keneshbayev, B, Zhaxybayeva, A. (2017). Building the Adaptive Project Groups in the Vertically Integrated Industries within the Quality Management System. Quality - Access to Success.

Scopus (10/2017)

  1.  

Dang, C. N., Le-Hoai, L. (2018). Relating knowledge creation factors to construction organizations ’effctiveness Empirical study. Journal of Engineering, Design and Technology.

Scopus (01/2018)

  1.  

Rakhimova, N. R., Rakhimov, R. Z., Lutskin, Y. S., Morozov, V. P., Osin, Y. N. (2018). Solidification Of Borate Ion-Exchange Resins By Alkali-Activated Slag Cements. Romanian Journal of Materials.

ISI (2018)

  1.  

Salloum, S. A., Al-Emran, M. (2018). Factors affecting the adoption of e-payment systems by university students: extending the TAM with trust. International Journal of Electronic Business.

Scopus (02/2018)

  1.  

Do, V. N. V., Lee, .C .H. (2018). Nonlinear thermal buckling analyses of functionally graded circular plates using higher-order shear deformation theory with a new transverse shear function and an enhanced mesh-free method. Acta Mechanica.

ISI (02/2018)

  1.  

Nguyen, L. D., Le-Hoai, L., Tran, D. Q., Dang, C. N. and Nguyen, C. V. (2018). Effect of project complexity on cost and schedule performance in transportation projects. Construction Management and Economics.

Scopus (04/2018)

  1.  

Do, V. N. V., Lee, C. H. (2018). Nonlinear analyses of FGM plates in bending by using a modified radial point interpolation mesh-free method. Applied Mathematical Modelling.

ISI (05/2018)

  1.  

Ameen, A. M. S., Ibrahim. Z., Othman, F., Al-Ansari, N., Yaseen, Z. M. (2018). Minimizing the Principle Stresses of Powerhoused Rock-Fill Dams Using Control Turbine Running Units: Application of Finite Element Method. Water.

ISI (06/2018)

  1.  

Rakhimov, R. Z., Rakhimova. N. R., Gayfullin, A. R., Morozov, V. P. (2018). Effect of the Addition of Thermally Activated Heavy Loam to Portland Cement on the Properties of Cement Stone. Inorganic Materials: Applied Research.

ISI (07/2018)

  1.  

Rakhimova, N. R., Rakhimov, R. Z. (2018). Reaction products, structure and properties ofalkali-activated metakaolin cements incorporatedwith supplementary materials - a review. Journal of Materials Research and Technology.

ISI (08/2018)

  1.  

Li, J., Ameen, A. M. A., Mohammad, T. A., Al-Ansari, N., Yaseen, Z. M. (2018). A Systematic Operation Program of a Hydropower Plant Based on Minimizing the Principal Stress: Haditha Dam Case Study. Water.

ISI (08/2018)

  1.  

Li, J., Salim, R. D., Aldlemy, M. S., Abdullah, J. M., Yaseen, Z. M. (2018). Fiberglass-Reinforced Polyester Composites Fatigue Prediction Using Novel Data-Intelligence Model. Arabian Journal for Science and Engineering.

ISI (08/2018)

  1.  

Nguyen, T. K. N., Kim, H. G., Kwac, L. K., Bui, Q. B., Nguyen, D. M., Jeong, H. (2018). Titanium dioxide-benzophenone hybrid as an effective catalyst for enhanced photochemical degradation of low density polyethylene. e-Polymers.

ISI (08/2018)

  1.  

Sulaiman, S. O., Shiri, J., Shiralizadeh, H., Kisi, O., Yaseen, Z. M. (2018). Precipitation pattern modeling using cross-station perception: regional investigation. Environmental Earth Sciences.

ISI (10/2018)

  1.  

Nguyen, D. M., Grillet, A. C., Bui, .Q .B, Diep, T. M. H., Woloszyn, M. (2018). Building bio-insulation materials based on bamboo powder and bio-binders. Construction and Building Materials.

ISI (10/2018)

  1.  

El-Nabouch R., Bui Q.B., Perrotin P., Plé O. (2018). Shear parameters of rammed earth material: results from different approaches. Advances in Materials Science and Engineering.

ISI (10/2018)

  1.  

Do, V. N. V.,  Lee, C. H. (2018). Quasi-3D   higher-order   shear   deformation   theory   for   thermal   buckling analysis   of   FGM   plates   based   on   a   meshless   method. Aerospace   Science   and Technology.

ISI (11/2018)

  1.  

Mehr, A. D., Nourani, V., Kahya, E., Hrnjica, B., Sattar, A. M. A., Yaseen, Z. M. (2018). Genetic programming in water resources engineering: A state-of-the-art review. Journal of Hydrology.

ISI (11/2018)

  1.  

Bui, Q. -B., Limam, A., Tan Trung Bui (2018). Dynamic discrete element modelling for seismic assessment of rammed earth walls. Engineering Structures.

ISI (11/2018)

  1.  

Bui, Q. -B., Nguyen, D. M., Nguyen, T. M. L., Kwac, L. K., Kim, H. G., Ko, S. C., Jeong, H. (2018). Free-standing Three Dimensional Graphene Incorporated with Gold Nanoparticles as Novel Binder-free Electrochemical Sensor for Enhanced Glucose Detection. Journal of Electrochemical Science and Technology 2018.

ISI (11/2018)

  1.  

Yaseen, Z. M., Keshtegar, B. (2018). Limited descent-based mean value method for inverse reliability analysis. Engineering with computer.

ISI (11/2018)

  1.  

Yaseen, Z. M., Tran, M. T., Kim, S., Bakhshpoori, S., Deo, R. C. (2018). Shear strength prediction of steel fiber reinforced concrete beam using hybrid intelligence models: A new approach. Engineering Structures.

ISI (12/2018)

  1.  

Khosravi, K., Mao, L., Kisi, O., Yaseen, Z. M., Shahid, S. (2018). Quantifying hourly suspended sediment load using data mining models: Case study of a glacierized Andean catchment in Chile. Journal of Hydrology.

ISI (12/2018)

  1.  

Ansari, S., Alavi, Z., Yaseen, Z. M. (2018). Performance of full-scale coagulation-flocculation/DAF as a pre-treatment technology for biodegradability enhancement of high strength wastepaper recycling wastewater. Environmental Science and Pollution Research.

ISI (12/2018)

  1.  

Hou, M., Zhang, T., Weng, F., Ali, M., Al-Ansari, N., Yaseen, Z. M. (2018). Global Solar Radiation Prediction Using Hybrid Online Sequential Extreme Learning Machine Model. Energies.

ISI (12/2018)

  1.  

Al‑Musawi, A. A, Alwanas, A. A. H., Salih, S. Q., Ali, Z. H., Tran, M. T., Yaseen, Z. M. (2018). Shear strength of SFRCB without stirrups simulation: implementation of hybrid artificial intelligence model. Engineering with Computers.

ISI (12/2018)

  1.  

Lam, M. N. T., Duc-Hien Le, d. H., Jaritngam, S. (2018). Compressive strength and durability properties of roller-compacted concrete pavement containing electric arc furnace slag aggregate and fly ash. Construction and Building Materials.

ISI (12/2018)

  1.  

Kravets, O. J., Choporov, O. N., Bolnokin, V. E. (2018). Mathematical Models and Algorithmization of Monitoring Control an Affiliated Network in Maintenance Service Distributed Organizations. Quality.

Scopus (12/2018)

  1.  

Kravets, O. J., Choporov, O. N. (2018). The problems and peculiarities of modelling integrated systems of heterogeneous traffic services. Journal of Siberian Federal University – Mathematics & Physics.

Scopus (12/2018)

  1.  

My, N. T. L., Duc-Hien, L., Saravut, J. (2018). Compressive strength and durability properties of roller-compacted concrete pavement containing electric arc furnace slag aggregate and fly ash. Construction and Building Materials.

ISI (12/2018)

  1.  

Chung, Y. S., Seo, D., Kim, J. (2018). Price Determinants and GIS Analysis of the Housing Market in Vietnam: The Cases of Ho Chi Minh City and Hanoi. Sustainability.

ISI (12/2018)

  1.  

Rakhimova, N. R., Rakhimov, R. Z., Morozov, V. P., Potapova, L. I. & Osin, Y. N. (2019). Solidification of simulated sodium nitrate liquid wastes and ion-exchange resins by sodium silicateactivated slag cements. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

ISI (01/2019)

  1.  

Rakhimova, N. R., Rakhimov, R. Z. (2019). Toward clean cement technologies: A review on alkali-activated fly-ash cements incorporated with supplementary materials. Journal of Non-Crystalline Solids.

ISI (2019)

  1.  

Tao, H., Bobaker, A. M., Ramal, M. M., Yaseen, Z. M., Hossain, M. S., Shahid, S. (2019). Determination of biochemical oxygen demand and dissolved oxygen for semi-arid river environment: application of soft computing models. Environmental Science and Pollution Research.

ISI (01/2019)

  1.  

Nguyen, D. M., Bui, Q. -B. (2019). Three-dimensional mesoporous hierarchical carbon nanotubes/nickel foam supported gold nanoparticles as a free-standing sensor for sensitive hydrazine detection. Journal of Electroanalytical Chemistry.

ISI (01/2019)

  1.  

Yaseen, Z. M., Allawi, M. F., Karami, H., Ehteram, M., Farzin, S., Ahmed, A. N., Koting, S. B., Mohd, N. S., Jaafar, W. Z. B., Afan, H. A., El-Shafie, A. (2019). A hybrid bat–swarm algorithm for optimizing dam and reservoir operation. Neural Computing and Applications.

ISI (01/2019)

  1.  

Do, V. N. V.Chang, K. H., Lee, C. H. (2019). Post-buckling analysis of FGM plates under in-plane mechanical compressive loading by using a mesh-free approximation. Archive of Applied Mechanics.

ISI (01/2019)

  1.  

Nguyen, D. M., Nguyen, M.H., Bui, Q. -B. (2019). Uniform WMoSx nanoparticles attached graphene nanosheets as highly effective electrocatalyst for oxygen reduction reaction in alkaline medium. Materials Chemistry and Physics.

ISI (02/2019)

  1.  

Yaseen, Z. M., Deo, S. O. S.R., Chau, K. (2019). An enhanced extreme learning machine model for river flow forecasting: state-of-the-art, practical applications in water resource engineering area and future research direction. Journal of Hydrology.

ISI (02/2019)

  1.  

Sahragard, H. P., Keshtegar, B., Chahouki, M. A. Z., Yaseen, Z. M. (2019). Modeling spatial distribution of plant species using autoregressive logistic regression method-based conjugate search direction. Plant Ecology.

ISI (02/2019)

  1.  

Yousif, A. A., Sulaiman, S. O., Diop, L., Ehteram, M., Shahid, S., Al-Ansari, N., Yaseen, Z. M. (2019). Open Channel Sluice Gate Scouring Parameters Prediction: Different Scenarios of Dimensional and Non-Dimensional Input Parameters.  Water Resources Management Strategy Under Global Change.

ISI (02/2019)

  1.  

Maroufpoor, S., Sanikhani, H., Kisi, O., Deo, R. C., Yaseen, Z. M. (2019). Long‐term modelling of wind speeds using six different heuristic artificial intelligence approaches. International Journal of Climatology.

ISI (02/2019)

  1.  

Devisch, O., Hannes, E., Trinh, T. A., Leus, M., Berben, J., Hien, D. T. (2019). Research-by-design framework for integrating education and research in an intercultural parallel design studio. Frontiers of Architectural Research

ISI (02/2019)

  1.  

Keshtegar, B., Bagheri, M., Yaseen, Z. M. (2019). Shear strength of steel fiber-unconfined reinforced concrete beam simulation: Application of novel intelligent model. Composite Structures.

ISI (03/2019)

  1.  

Kisi, O., Yaseen, Z. M. (2019). The potential of hybrid evolutionary fuzzy intelligence model for suspended sediment concentration prediction. Catena.

ISI (03/2019)

  1.  

Nguyen, D. M., Bach, L. G., Bui, Q. -B. (2019). Hierarchical nanosheets based on zinc-doped nickel hydroxide attached 3D framework as free-standing nonenzymatic sensor for sensitive glucose detection. Journal of Electroanalytical Chemistry.

ISI (03/2019)

  1.  

Bui, Q. -B., Bui T. T., Tran, M. P., Bui, T. L., Le, H. A. (2019). Assessing the Seismic Behavior of Rammed Earth Walls with an L-Form Cross-Section. Sustainability.

ISI (03/2019)

  1.  

Bui, Q. B., Bui, T. T., El-Nabouch, R., Thai, D. K. (2019). Vertical Rods as a Seismic Reinforcement Technique for Rammed Earth Walls: An Assessment. Advances in Civil Engineering.

ISI (03/2019)

  1.  

Le, T. Q., Devisch, O., Trinh, T. A. (2019). Flood‐resilient urban parks: Toward a framework. Area - Royal Geographical Society.

ISI (03/2019)

  1.  

Saa .A .A, Al-Emran .M, and Shaalan .K. (2019). Factors Affecting Students’ Performance in Higher Education: A Systematic Review of Predictive Data Mining Techniques. Springer.

Scopus (04/2019)

  1.  

D.M.Nguyen, M.H.Nguyen, Bui, Q. -B. (2019). A novel electrocatalyst based on Fe2Ni1nanoparticles anchored nitrogen doped graphene nanosheets towards efficient oxygen reduction reaction. Journal of Alloys and Compounds.

ISI (04/2019)

  1.  

Awadh, Z. M., Yaseen, Z. M. (2019). Investigation of silica polymorphs stratified in siliceous geode using FTIR and XRD Methods. Materials Chemistry and Physics.

ISI (04/2019)

  1.  

Yaseen, Z. M., Koting, S. B., Ehteram, M., Hossain, Md. S., Fai, C. M., Afan, H. A., Mohd, N. S., El-Shafie, W. Z. B. J. A. (2019). A Novel Hybrid Evolutionary Data-Intelligence Algorithm for Irrigation and Power Production Management: Application to Multi-Purpose Reservoir Systems. Sustainability.

ISI (04/2019)

  1.  

Jing, W., Naji, W. I., Zehawi, R. N., Ali, Z. H., Al-Ansari, N. and Yaseen, .Z .M. (2019). System Dynamics Modeling Strategy for Civil Construction Projects: The Concept of Successive Legislation Periods. Water science and Technology.

ISI (04/2019)

  1.  

Nguyen, D. M., Bich, H. N., Anh, P. D. H., Ai-Le, P. H., Bui, Q. B. (2019). Vertical copper oxide nanowire arrays attached three-dimensional macroporous framework as a self-supported sensor for sensitive hydrogen peroxide detection. Arabian Journal of Chemistry.

ISI (04/2019)

  1.  

Mohtar, W. H. M. W., Maulud, K. N. A., Muhammad, N. S., Sharil, S., Yaseen, Z. M. (2019). Spatial and temporal risk quotient based river assessment for water resources management. Environmental Pollution.

ISI (05/2019)

  1.  

Nguyen, D. M., Bach, L. G., Bui, Q. -B. (2019). A high-performance catalyst based on binary CuFe alloyed nanocrystals encapsulated in nitrogen-doped graphene nanosheets towards oxygen reduction reaction. Journal of Solid State Chemistry.

ISI (05/2019)

  1.  

Kisi, O., Heddam, S., Yaseen, Z. M. (2019). The implementation of invariable scheme-based air temperature for solar radiation prediction: New development of dynamic evolving neural-fuzzy inference system model. Applied Energy.

ISI (05/2019)

  1.  

Nguyen, D. M., Hai Anh, P. D., Bach, L. G., Bui, Q. B. (2019). Hierarchical heterostructure based on molybdenum dichalcogenide nanosheets assembled nitrogen doped graphene layers for efficient hydrogen evolution reaction. Materials Research Bulletin.

ISI (07/2019)

  1.  

Thi, M. L. N., Tran, T. H., Anh, P. D. H., Nhac-Vu, H. -T., Bui, Q. B. (2019). Hierarchical zinc–nickel phosphides nanosheets on 3D nickel foam as self-support electrocatalysts for hydrogen evolution reaction. Polyhedron.

ISI (08/2019)

  1.  

Nguyen, D. M., Bach, L. G., Bui, .Q .B. (2019). Novel urchin-like FeCo oxide nanostructures supported carbonspheres as a highly sensitive sensor for hydrazine sensing application. Journal of Pharmaceutical and Biomedical Analysis.

ISI (08/2019)

  1.  

Thi, M. L. N., Tran, T. H., Hai Anh, P. D., Nhac-Vu, H. –T., Bui, Q. B. (2019). An innovative catalyst of nickel-palladium alloy nanocrystals embedded nitrogen-doped graphene for efficient oxygen reduction reaction. Journal of Alloys and Compounds.

ISI (08/2019)

  1.  

Bach, L. G., Thi, M. L. N., Bui, Q. B., Nhac-Vu, H. –T. (2019). Hierarchical cobalt nanorods shelled with nickel oxide vertically attached 3D architecture as non-binder and free-standing sensor for sensitive non-enzymatic glucose detection. Materials Research Bulletin.

ISI (10/2019)

  1.  

Heddam. O. K. S., Yaseen, Z. M. (2019). The implementation of univariable scheme-based air temperature for solar radiation prediction: New development of dynamic evolving neural-fuzzy inference system model. Applied Energy.

ISI (05/2019)

  1.  

Yaseen, Z. M., Keshtegar, B., Hwang, H., Nehdi, M. L. (2019). Predicting reinforcing bar development length using polynomial chaos expansions. Engineering Structure.

ISI (09/2019)

  1.  

Varandili, S. A., Arvanaghi, H., Ghorbani, M. A., Yaseen, Z. M. (2019). A novel and exact analytical model for determination of critical depth in trapezoidal open channels. Flow Measurement and Instrumentation.

ISI (08/2019)

  1.  

Khozani, Z. S., Khosravi, K., Klove, B., Mohtar, W. H. M. W., Yaseen, Z. M. (2019). Determination of compound channel apparent shear stress: application of novel data mining models. Journal of Hydroinformatics.

ISI (06/2019)

  1.  

Kisi, O., Choubin, B., Deo, R. C., Yaseen, Z. M. (2019). Incorporating synoptic-scale climate signals for streamflow modelling over the Mediterranean region using machine learning models. Hydrological Sciences Journal.

ISI (07/2019)

  1.  

Do, V. N. V., Lee, C. (2019). Numerical investigation on post-buckling behavior of FGM sandwich plates subjected to in-plane mechanical compression. Ocean Engineering.

 

ISI (07/2019)

  1.  

Bach, L. G., Nguyen, D. M., Bui, Q. B., Ai-Le, P. H., Nhac-Vu, H. T. (2019). Hierarchical molybdenum dichalcogenide nanosheets assembled nitrogen doped graphene layers for sensitive electrochemical dopamine detection. Materials Chemistry and Physics.

ISI (10/2019)

  1.  

Yaseen, Z. M., Aldlemy, M. S., Sadegh, M. O. (2019). Non-gradient probabilistic Gaussian global-best harmony search optimization for first-order reliability method. Engineering with Computers.

ISI (05/2019)

  1.  

Maroufpoor, S. M. E., Bozorg-Haddad, O., Shiri, J., Yaseen, Z. M. (2019). Soil moisture simulation using hybrid artificial intelligent model: Hybridization of adaptive neuro fuzzy inference system with grey wolf optimizer algorithm. Journal of Hydrology.

ISI (08/2019)

  1.  

Alwanas, A. A. H., Al-Musawi, A. A., Salih, S. Q., Tao, H., Ali, M., Yaseen, Z. M. (2019). Load-carrying capacity and mode failure simulation of beam-column joint connection: Application of self-tuning machine learning model. Engineering Structures.

ISI (09/2019)

  1.  

Nabaei, S., Sharafati, A., Yaseen, Z. M., Shahid, S. (2019). Copula based assessment of meteorological drought characteristics: Regional investigation of Iran. Agricultural and Forest Meteorology.

ISI (10/2019)

  1.  

Bui, Q. B., Colin, J., Nguyen, T. D., Dang, M. N., Nguyen, T. M. L., Perre, P. (2019). Mechanical and thermal properties of a biocomposite based on polyvinylchloride/epoxidized natural rubber blend reinforced with rice husk microfiller. Journal of Thermoplastic Composite Materials.

ISI (06/2019)

  1.  

Bach, L. G., Thi, M. L. N., Bui, Q. B., Nhac-Vu, H. T. (2019). Palladium sulfide nanoparticles attached MoS2/nitrogen-doped graphene heterostructures for efficient oxygen reduction reaction. Synthetic Metals.

 

  1.  

El-Nabouch, R., Bui, Q. B., Ple, O., Perrotin, P. (2019). Rammed earth under horizontal loadings: Proposition of limit states. Construction and Building Materials.

ISI (09/2019)

  1.  

Mezhuyev, V., Al-Emran, M., Ismail, M. A., Benedicenti, L., Chandran, D. (2019). The Acceptance of Search-Based Software Engineering Techniques: An Empirical Evaluation Using the Technology Acceptance Model. IEEE Access.

ISI (05/2019)

  1.  

Salloum, S. A., Al-Emran, M., Khalaf, R., Habes, M., Shaalan, K. (2019). An Innovative Study of E-Payment Systems Adoption in Higher Education: Theoretical Constructs and Empirical Analysis. International Journal of Interactive Mobile Technologies (iJIM).

ISI (2019)

  1.  

Bich, H. N., Thi, M. L. N., Son, N. T., Bui, Q. B., Ai-Le, P. H., Nhac-Vu, H. –T. (2019). Nickel-tungsten sulfides nanostructures assembled nitrogen-doped graphene as a novel catalyst for effective oxygen reduction reaction. Journal of Electroanalytical Chemistry.

ISI (09/2019)

  1.  

Bach, L. G., Thi, M. L. N., Son, N. T., Bui, Q. B., Nhac-Vu, H. –T., Ai-Le, P. H. (2019). Mesoporous gold nanoparticles supported cobalt nanorods as a free-standing electrochemical sensor for sensitive hydrogen peroxide detection. Journal of Electroanalytical Chemistry.

ISI (09/2019)

  1.  

Naganna, S. R., Deka, P. C., Ghorbani, M. A., Biazar, S. M., Al-Ansari, N., Yaseen, Z. M. (2019). Dew Point Temperature Estimation: Application of Artificial Intelligence Model Integrated with Nature-Inspired Optimization Algorithms. Water.

ISI (04/2019)

  1.  

Tao, H., Ebtehaj, I., Bonakdari, H., Heddam, S., Voyant, C., Al-Ansari, N., Deo, R., Yaseen, Z. M. (2019). Designing a New Data Intelligence Model for Global Solar Radiation Prediction: Application of Multivariate Modeling Scheme. Energies.

ISI (04/2019)

  1.  

Al-Sudani, Z. A., Salih, S., Q., Sharafati, A., Yaseen, Z. M. (2019). Development of multivariate adaptive regression spline integrated with differential evolution model for streamflow simulation. Journal of Hydrology.

ISI (06/2019)

  1.  

Sharafati, A., Khosravi, K., Khosravinia, P., Ahmed, K., Salman, S. A., Yaseen, Z. M., Shahid, S. (2019). The potential of novel data mining models for global solar radiation prediction. International Journal of Environmental Science and Technology.

ISI (04/2019)

  1.  

Lee, S. –H., Park, D. –W., Vo, H. V., Fang, M. (2019). Analysis of asphalt concrete track based on service line test results. Construction and Building Materials.

ISI (04/2019)

  1.  

Zhu, S., Keshtegar, B., Trung, N., Yaseen, Z. M., Bui, D. T. (2019). Reliability-based structural design optimization: hybridized conjugate mean value approach. Engineering with Computers.

ISI (07/2019)

  1.  

Do, V. N. V., Lee, C. H. (2019). Mesh-free thermal buckling analysis of multilayered composite plates based on an nth-order shear deformation theory. Composite Structures.

ISI (09/2019)

  1.  

Do, V. N. V., Lee, C. H. (2019). Quasi-3D isogeometric buckling analysis method for advanced composite plates in thermal environments. Aerospace Science and Technology.

ISI (09/2019)

  1.  

Vu To-Anh Phan (2019). Improvement in Engineering Properties of Mudstone in Southwestern Taiwan Through Compaction and a Cement Additive. Geotechnical and Geological Engineering

Scopus (06/2018)

  1.  

Vo, H. V., Park, D-W., Seo, J-W., Le, T. H. M. (2019). Effects of asphalt types and aging on healing performance of asphalt mixtures using induction heating method. Journal of Traffic and Transportation Engineering (English Edition).

Scopus (04/2019)

  1.  

Rakhimova, N. R., Rakhimov, R. Z. (2019). Literature Review of Advances in Materials Used in Development of Alkali-Activated Mortars, Concretes, and Composites. Journal of Materials in Civil Engineering.

ISI (11/2019)

  1.  

Salih, S. Q., Aldlemy, M. S., Rasani, M. R., Ariffin, A. K., Ya, T. M. Y. S. T., Al-Ansari, N., Yaseen, Z. M., Chau, K. (2019). Thin and sharp edges bodies-fluid interaction simulation using cut-cell immersed boundary method. Engineering Applications of Computational Fluid Mechanics.

ISI (08/2019)

  1.  

Salih, S. Q., Allawi, M. F., Yousif, A. A., Armanous, A. M., Saggi, M., K., Ali, M., Shahid, S., Al-Absari, N., Yaseen, Z. M., Chau, K. (2019). Viability of the advanced adaptive neuro-fuzzy inference system model on reservoir evaporation process simulation: case study of Nasser Lake in Egypt. Engineering Applications of Computational Fluid Mechanics

ISI (08/2019)

  1.  

Maroufpoor, S., Sanikhani, H., Kisi, O., Deo, R. C., Yaseen, Z. M. (2019). Long‐term modelling of wind speeds using six different heuristic artificial intelligence approaches. International Journal of Climatology.

ISI (02/2019)

  1.  

Bokde, N. D., Feijoo, A., Al-Ansari, N., Yaseen, Z. M. (2019). A comparison between reconstruction methods for generation of synthetic time series applied to wind speed simulation. Engineering (Miscellaneous).

ISI (09/2019)

  1.  

Surendan, U., Sushanth, C. M., Joseph, E. J., Al-Ansari, N. & Yaseen, Z. M. (2019). FAO CROPWAT Model-Based Irrigation Requirements for Coconut to Improve Crop and Water Productivity in Kerala, India. Sustainability.

ISI (09/2019)

  1.  

Beyaztasa, U., Yaseen, Z. M. (2019). Drought interval simulation using functional data analysis. Journal of Hydrology.

ISI (12/2019)

  1.  

Ashrafian, A., Shokri, F., Amiri, M. J. T., Yaseen, Z. M., Rezaie-Balf, M. (2020). Compressive strength of Foamed Cellular Lightweight Concrete simulation: New development of hybrid artificial intelligence model. Construction and Building Materials.

ISI (01/2020)

  1.  

Van, S. Q., Le-Hoai, L., Dang, C. N. (2019). Predicting implementation cost contingencies for residential construction projects in flood-prone areas. International Journal of Managing Projects in Business.

ISI (12/2019)

  1.  

Hadi, S. J., Abba, S. I., Sammen, S. S., Salih, S. Q., Al-Ansari, N., Yaseen, Z. M. (2019). Non-Linear Input Variable Selection Approach Integrated With Non-Tuned Data IntelligenceModel for Streamflow Pattern Simulation. IEEE-INST Electrical Electronics Engineers Inc.

ISI (09/2019)

  1.  

Bhagat, S. K., Tiyasha, Welde, W., Tesfaye, O., Tung, T. M., Al-Ansari, N., Salih, S. Q., Yaseen, Z. M. (2019). Evaluating Physical and Fiscal Water Leakage in Water Distribution System. Water.

ISI (10/2019)

  1.  

Beyaztas, U., Salih, S. Q., Chau, K., Al-Ansari, N., Yaseen, Z. M. (2019). Construction of functional data analysis modelingstrategy for global solar radiation prediction:application of cross-station paradigm. Engineering Applications of Computational Fluid.

ISI (10/2019)

  1.  

Homsi, R., Shiru, M. S., Shahid, S., Ismail, T., Haruna, S. B., Al-Ansari, N., Chau, K., Yaseen, Z. M. (2019). Precipitation projection using a CMIP5 GCM ensemble model: a regional investigation of Syria. Engineering Applications of Computational Fluid.

ISI (11/2019)

  1.  

Ashrafzadeh, A., Ghorbani, M. A., Biazar, S. M., Yaseen, Z. M. (2019). Evaporation process modelling over northern Iran: application of an integrative data-intelligencemodel with the krill herd optimization algorithm. Hydrological Sciences Journal.

ISI (10/2019)

  1.  

Khosravi, K., Daggupati, Alami, M. T., Awadh, S. M., Ghareb, M. I., Panahi, M., Pham, P. Y., Rexaie, F., Qi, C., Yaseen, Z. M. (2019). Meteorological data mining and hybrid data-intelligence models for reference evaporation simulation: A case study in Iraq. Computers and Electronics in Agriculture.

ISI (12/2019)

  1.  

Van, S. Q., Le-Hoai, L., Dang, C. N. (2019). Predicting implementation cost contingencies for residential construction projects in flood-prone areas. International Journal of Managing Projects in Business.

ISI (12/2019)

  1.  

Beyaztas, U., Salih, S. Q., Chau, K-W., Al-Ansari, N., Yaseen, Z. M. (2019). Construction of functional data analysis modeling strategy for global solar radiation prediction: application of cross-station paradigm. Engineering Applications of Computational Fluid Mechanics.

ISI (10/2019)

  1.  

Homis, R., Shiru, M. S., Shahid, S., Ismail, T., Haruna, S. B., Al-Ansari, N., Chau, K-W., Yaseen, Z. M. (2019). Precipitation projection using a CMIP5 GCM ensemble model: a regional investigation of Syria. Engineering Applications of Computational Fluid Mechanics.

ISI (11/2019)

  1.  

Ashrafzadeh, A., Ghorbani, M. A., Biazar, S. M., Yaseen, Z. M. (2019). Evaporation process modelling over northern Iran: application of an integrative data-intelligence model with the krill herd optimization algorithm. Hydrological Sciences Journal.

ISI (10/2019)

  1.  

Khosravi, K., Daggupati, P., Alami, M. T., Awadh, S. M., Ghareb, M. I., Panahi, M., Pham, B. T., Rezaie, F., Qi, C., Yaseen, Z. M. (2019). Meteorological data mining and hybrid data-intelligence models for reference evaporation simulation: A case study in Iraq. Computers and Electronics in Agriculture

ISI (12/2019)

  1.  

Hadi, S. J., Abba, S. I., Sammen, S. S., Salih, S. Q. Al-Ansari, N., Yaseen, Z. M. (2019). Non-Linear Input Variable Selection Approach Integrated With Non-Tuned Data Intelligence Model for Streamflow Pattern Simulation. Ieee-Inst Electrical Electronics Engineers Inc.

ISI (09/2019)

  1.  

Bhagat, S. K., Tiyasha, Welde, W., Tesfaye, O., Tung, T. M., Al-Ansari, N., Salih, S. Q., Yaseen, Z. M. (2019). Evaluating Physical and Fiscal Water Leakage in Water Distribution System. Water.

ISI (10/2019)

  1.  

Mai, L. N. T., Tran, T. H., Bui, Q. B., Nhac-Vu, H. T. (2019). A novel nanohybrid of gold nanoparticles anchored copper sulfide nanosheets as sensitive sensor for nonenzymatic glucose detection. Colloids and Surfaces A: Physicochemical and Engineering Aspects.

ISI (12/2019)

  1.  

Hai, C. P., Nhu-Ngoc, D., Sungrae, C., Phong, T. N., Anh-Tuan, P-H. (2019). Construction Hazard Investigation Leveraging Object Anatomization on an Augmented Photoreality Platform. Applied Sciences.

ISI (10/2019)

  1.  

Mostafa, A-E., Timothy, T. (2019). Do knowledge acquisition and knowledge sharing really affect e-learning adoption? An empirical study. Education and Information Technologies.

Scopus (12/2019)

  1.  

Noor, A-Q., Norhisham, M-N., Mostafa, A-E. (2019). What leads to social learning? Students ’ attitudes towards using social media applications in Omani higher education. Education and Information Technologies.

Scopus (12/2019)

  1.  

Yaseen, Z.M., Zigale, T.T., Tiyasha, Kumar, R., Salih, S.Q., Awasthi, S., Tung, T.M., Al-Ansari, N. & Bhagat, S. K. (2019). Laundry wastewater treatment using a combination of sand filter, bio-char and teff straw media. Scientific Reports.

ISI (12/2019)

  1.  

Tran, T.H., Thi, M.L.N., Son, N.T., Bui, Q.B., Ai-Le, P.H., Nhac-Vu, H.T. (2019). Novel nanoneedle structures of zinc-doped cobalt hydroxide as a self-supported sensor for sensitive glucose detection. Materials Research Bulletin.

ISI (12/2019)

  1.  

Pham, T.M., Elchalakani, M., Hao, M., Lai, J., Ameduri, S., Tran.T.M. (2019). Durability Characteristics of Lightweight Rubberized Concrete. Construction and Building Materials.

ISI (11/2019)

  1.  

Salih, S.Q., Sharafati, A., Khosravi, K., Faris, H., Kisi, O., Tao, H., Ali, M. & Yaseen, Z. M. (2019). River suspended sediment load prediction based on river discharge information: application of newly developed data mining models. Hydrological Sciences Journal.

ISI (12/2019)

  1.  

Tao,H., Keshtegar, B., Yaseen, Z.M. (2019). The Feasibility of Integrative Radial Basis M5Tree Predictive Model for River Suspended Sediment Load Simulation. Water Resources Management.

ISI (11/2019)

  1.  

 

 

2018

1

Yaseen, Z. M., Fu, M., Wang, C., Mohtar, W. H. M. W., Deo, R. C., & El-shafie, A. (2018). Application of the Hybrid Artificial Neural Network Coupled with Rolling Mechanism and Grey Model Algorithms for Streamflow Forecasting Over Multiple Time Horizons. Water Resources Management.

ISI (01/2018)

2

Nguyen, D. M., Grillet, A.-C., Diep, T. M. H., Bui, Q. B., & Woloszyn, M. (2018). Influence of thermo-pressing conditions on insulation materials from bamboo fibers and proteins based bone glue. Industrial Crops and Products.

ISI (01/2018)

3

Rakhimova, N.R.Rakhimov, R.Z., Gaifullin, A.R., Morozov, V.P., Influence of the calcined light loam on the properties of the hardened portland cement paste. Romanian Journal of Materials.

ISI (01/2018)

4

Bui, Q.-B. (2017). Nondestructive Vibrational Tests and Analytical Solutions to Determine the Young’s Modulus of Rammed Earth Material. In Proceedings of the International Conference on Advances in Computational Mechanics 2017 (pp. 631–644).

ACOME 2017

5

El-Nabouch R, Pastore J, Bui Q B, Plé O, “Limit Analysis, rammed earth material and Casagrande test”, Comptes rendus Mecanique.

ISI (02/2018)

6

Tran, M.-T., Bui, Q.-B., Sentosa, B., Nguyen, N.-T., Duong, T.-H., & Plé, O. (2018). Sustainable RC Beam-Column Connections with Headed Bars: A Formula for Shear Strength Evaluation. Sustainability.

ISI (02/2018)

7

Sanikhani, H., Kisi, Q., Maroufpoor, E. & Yaseen, Z. M. (2018). Temperature-based modeling of reference evapotranspiration using several artificial intelligence models: application of different modeling scenarios. Theoretical and Applied Climatology.

ISI (02/2018)

8

Yaseen, Z. M., Ramal, M. M., Diop, L., Jaafar, O., Demir, V. & Kisi, O. (2018). Hybrid Adaptive Neuro-Fuzzy Models for Water Quality Index Estimation. Theoretical and Applied Climatology. Water Resources Management.

ISI (02/2018)

9

Do, V. N. V., Tran, M. T., & Lee, C.-H. (2018). Nonlinear thermal buckling analyses of functionally graded plates by a mesh-free radial point interpolation method. Engineering Analysis with Boundary Elements.

ISI (02/2018)

10

Anh Ho, L. D., Tran, M.-T., Cao, X.-H., Dao, V.-A., Ngo, D.-T., & Hoang, D.-Q. (2018). Field-driven single domain wall motion in ferromagnetic nanowires. RSC Advances.

ISI (04/2018)

11

Rakhimova, N. R., Rakhimov, R. Z., Lutskin, Y. S., Morozov, V.P., Gubaidullina, A. M., Osin , Y. N. (2018). Solidification of simulated borate liquid wastes with alkali-activated slag cements. Romanian Journal of Materials.

ISI (05/2018)

12

El-Nabouch, R., Bui, Q.-B., Plé, O., & Perrotin, P. (2018). Characterizing the shear parameters of rammed earth material by using a full-scale direct shear box. Construction and Building Materials.

ISI (05/2018)

13

Van Do, V. N., & Lee, C.-H. (2018). Nonlinear analyses of FGM plates in bending by using a modified radial point interpolation mesh-free method. Applied Mathematical Modelling.

ISI (05/2018)

14

Rakhimova, N. R., Rakhimov, R. Z., Morozov, V. P., Gaifullin, A. R., Potapova, L. I., Gubaidullina, A. M., & Osin, Y. N. (2018). Marl-based geopolymers incorporated with limestone: A feasibility study. Journal of Non-Crystalline Solids.

ISI (07/2018)

15

Rakhimova, N. R., Rakhimov, R.Z., Lutskin, Y.S., Morozov, V.P., Osin, Y.N. (2018). Solidification of borate ion-exchange resins by alkali-activated slag cements. Romanian Journal of Materials.

ISI (2018)

16

Tuan, B. Q., & Tam, N. M. (2018). Semi top-down method combined with earth-bank, an effective method for basement construction. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

17

Hrubesova, E., Lahuta, H., Mohyla, M., Quang, T. B., & Phi, N. D. (2018). Experimental sensitivity analysis of subsoil-slab behaviour regarding degree of fibre-concrete slab reinforcement. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

18

Ngo, L. M. (2018). Social housing for workers – A new housing model for Ho Chi Minh City, Vietnam. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

19

Nguyen, Q. T., Le, T. D., & Konečný, P. (2018). Influences of geological parameters to probabilistic assessment of slope stability of embankment. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

20

Thao, H. T. P., & Nam, N. D. (2018). Study on energy efficiency in Vietnamese row house - case study of Tang Nhon Phu A Ward, District 9, HCMC. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

21

Kumphong, J., Satiennam, T., Satiennam, W., & Trinh, T. A. (2018). Psychological models for development of motorcycle helmet use among students in Vietnam. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

22

Trinh, T. A., & Le, T. P. L. (2018a). Biofuels Potential for Transportation Fuels in Vietnam: A Status Quo and SWOT Analysis. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

23

Trinh, T. A., & Le, T. P. L. (2018b). Investigating Proenvironmental Behavior: The Case of Commuting Mode Choice. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

24

Trinh, T. A., & Le, T. P. L. (2018c). The Association Between Risk-taking Behavior and Helmet Use Among Motorcyclist. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

25

Tran, M.-T., Do, V. N. V., & Nguyen, T.-A. (2018). Behaviour of steel-concrete composite beams using bolts as shear connectors. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

26

Yaseen, Z. M., Afan, H. A., & Tran, M.-T. (2018). Beam-column joint shear prediction using hybridized deep learning neural network with genetic algorithm. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

27

Bui, Q.-B., Phan, T.-A.-V., Tran, M.-T., & Le, D.-H. (2018). Tentative to use wastes from thermal power plants for construction building materials. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

28

Bui, T. T., Tran, H. V., Limam, A., Bost, M., Bui, Q. B., & Robit, P. (2018). A new concept of precast concrete retaining wall: from laboratory model to the in-situ tests. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

29

Le, D.-H., Sheen, Y.-N., & Lam, M. N.-T. (2018). Self-compacting concrete with sugarcane bagasse ash – ground blast furnace slag blended cement: fresh properties. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

30

Chang, K.-H., Shin, W. S., Vuong, D. N. V., & Lee, C. H. (2018). Investigation on the Effect of Initial Welding Imperfection on Fatigue strength of Tubular Member by FEM. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

31

Do, V. N. V. (2018a). A Modified Kirchhoff plate theory for Free Vibration analysis of functionally graded material plates using meshfree method. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

32

Do, V. N. V. (2018b). The numerical high cycle fatigue damage model of fillet weld joint under weld-induced residual stresses. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

33

Um, T.-H., Lee, C.-H., Chang, K.-H., & Do, V. N. V. (2018). Features of residual stresses in duplex stainless steel butt welds. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

34

Lee, C.-H., Do, V. N. V., Chang, K.-H., Jeon, J.-T., & Um, T.-H. (2018). Influence of weld-induced residual stresses on the hysteretic behavior of a girth-welded circular stainless steel tube. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

35

Hsiao, D. H., Hsieh, C. S., Yeh, L. C., Lin, D. Y., & Phan, V. T.-A. (2018). A study on a instability slope in Taiwan subjected to rainfalls. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

36

Phan, V. T.-A., & Hsiao, D.-H. (2018). Undrained behavior and shear strength of clean sand containing low-plastic fines. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

37

Phan, V. T.-A., & Pham, K. N.-A. (2018). Improvement in engineering properties of soft-soil using cement and lime additives: A case study of southern Vietnam. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

38

Tran, H. T. (2018a). Analysis of Mechanical Behavior of the Callovo-Oxfordian Argillite. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

39

Tran, H. T. (2018b). Optimum design of Geodesic dome’s jointing system. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

40

Dang, T. H. (2018). Street Life as the negotiation process: case study of Sidewalk Informal Economy in Ho Chi Minh City. IOP Conference Series: Earth and Environmental Science.

CUTE 2018

41

Yaseen, Z.M., Karami, H., Ehteram, M., Mohd, N.S., Mousavi, S. F., Hin, L.S., Kisi, O., Farzin, S., Kim, S., El-Shafie, A. (2018). Optimization of Reservoir Operation Using New Hybrid Algorithm. KSCE Journal of Civil Engineering.

ISI (07/2018)

42

Diop, L., Bodian, A., Djaman, K., Yaseen, Z.M., Deo, R.C., El-shafie, A., Brown, L.C. (2018). The influence of climatic inputs on stream‑flow pattern forecasting: case study of Upper Senegal River. Environmental Earth Sciences.

ISI (02/2018)

43

Tao, H., Diop, L., Bodianc, A., Djamand, K., Ndiayec, P.M., Yaseen, Z.M. (2018). Reference evapotranspiration prediction using hybridized fuzzy model with firefly algorithm: Regional case study in Burkina Faso. Agricultural Water Management.

ISI (09/2018)

44

Ehteram, M., Othman, F.B., Yaseen, Z.M., Afan, H.A., Allawi, M.F., Malek, M.A., Ahmed, A.N., Shahid, S., Singh, V., El-Shafie, A. (2018). Improving the Muskingum Flood Routing Method Using a Hybrid of Particle Swarm Optimization and Bat Algorithm. Water.

ISI (06/2018)

45

Sanikhani, H., Deo, R., Yaseen, Z.M., Eray, O., Kisi, O. (2018). Non-tuned data intelligent model for soil temperature estimation: A new approach. Geoderma.

ISI (11/2018)

46

Water Flow Stabilization Using Submerged Weir for Draft Tube Reaction Hydraulic Turbine

ISI

47

Sanikhani, H., Deo, R., Samui, P., Kisi, O., Mert, C., Mirabbasi, R., Gavili, S., Yaseen, Z.M. (2018). Survey of different data-intelligent modeling strategies for forecasting air temperature using geographic information as model predictors. Computers and Electronics in Agriculture.

ISI (09/2018)

48

Tao, H., Sulaiman, S.O., Yaseen, Z.M., Asadi, H., Meshram, S.G. (2018). What Is the Potential of Integrating Phase Space Reconstruction with SVM-FFA Data-Intelligence Model? Application of Rainfall Forecasting over Regional Scale. Water Resources Management.

ISI (09/2018)

49

Ghorbani, M. A., Khatibi, R., Karimi, V., Yaseen, Z.M., Zounemat-Kermani, M. (2018). Learning from Multiple Models Using Artificial Intelligence to Improve Model Prediction Accuracies: Applications to River Flows. Water Resources Management.

ISI (07/2018)

50

Le, D.-H. Sheen, Y.-N., Lam, M. N.-T. (2018). Fresh and hardened properties of self-compacting concrete with sugarcane bagasse ash–slag blended cement. Construction and Building Materials.

ISI (10/2018)

51

Nguyen, D.M., Grillet, A., Bui, Q.B., Diep, T.M.H., Woloszyna, M. (2018). Building bio-insulation materials based on bamboo powder and bio-binders. Construction and Building Materials.

ISI (10/2018)

2017

1

Hoang, D. Q., Korneychuk, S., Sankaran, K. J., Pobedinskas, P., Drijkoningen, S., Turner, S., ... & Haenen, K. (2017). Direct nucleation of hexagonal boron nitride on diamond: Crystalline properties of hBN nanowalls. Acta Materialia.

ISI (04/2017)

2

Van Do, V. N., & Lee, C. H. (2017). Bending analyses of FG-CNTRC plates using the modified mesh-free radial point interpolation method based on the higher-order shear deformation theory. Composite Structures.

ISI (05/2017)

3

El-Nabouch, R., Bui, Q. B., Perrotin, P., & Plé, O. Experimental and Numerical Studies on Cohesion and Friction Angle of Rammed Earth Material. In Poromechanics VI (pp. 864-872).

BIOT 2017

4

Bui, Q. B., El-Nabouch, R., Perrotin, P., & Plé, O. Assessing a Nondestructive Method to Determine the Young’s Modulus of Rammed Earth Material. In Poromechanics VI (pp. 855-863).

BIOT 2017

5

Bui Q.-B., Prudhomme E., Grillet A.-C., Prime N. An exploratory study on earthen materials stabilized by alkaline activator. 2nd ICBBM &1st EcoGRAFI, Clermont-Ferrand.

ICBBM 2017

6

Tran H-D, Bui Q.-B., Grillet A.-C. Assessing a method of bamboo treatment and its effects on the durability and mechanical performance”. 2nd ICBBM &1st EcoGRAFI, Clermont-Ferrand.

ICBBM 2017

7

Trung, P. Q., Butler, D. L., & Khun, N. W. (2017). An investigation of the properties of conventional and severe shot peened low alloy steel. Materials Research Express.

ISI (06/2017)

8

Trung, P. Q., Khun, N. W., & Butler, D. L. (2017). Effect of shot peening process on the fatigue life of shot peened low alloy steel. Journal of Engineering Materials and Technology.

ISI (06/2017)

9

Van Do, V. N., & Thai, C. H. (2017). A modified Kirchhoff plate theory for analyzing thermo-mechanical static and buckling responses of functionally graded material plates. Thin-Walled Structures.

ISI (08/2017)

10

El-Nabouch, R., Bui, Q. B., Plé, O., & Perrotin, P. (2017). Assessing the in-plane seismic performance of rammed earth walls by using horizontal loading tests. Engineering Structures

ISI (08/2017)

11

Bui Q-B, Grillet A-C, Tran H-D “A Bamboo Treatment Procedure: Effects on the Durability and Mechanical Performance”, Sustainability

ISI (8/2017)

12

Tran, T. M., & Hadi, M. N. (2017). Shear strength model of reinforced-concrete exterior joint under cyclic loading. Proceedings of the Institution of Civil Engineers-Structures and Buildings.

Proceedings of the Institution of Civil Engineers - Structures and Buildings  2017

13

Bui, T.-T., Limam, A., Nana, W.-S.-A., Ferrier, E., Bost, M., & Bui, Q.-B. (2017). Evaluation of one-way shear behaviour of reinforced concrete slabs: experimental and numerical analysis. European Journal of Environmental and Civil Engineering.

ISI (9/2017)

14

Bui, Q.-B., Tran, M.-T., & Le, D.-H. (2017). Using Wastes from Thermal Power Plants for Manufacturing of Low Strength Construction Materials. In Proceedings of the 4th Congrès International de Géotechnique - Ouvrages -Structures (pp. 617–624). Springer, Singapore.

CIGOS 2017

15

Tran, M. T., Nguyen, M. T., & Bui, Q. B. (2017). A New Formula for the Shear Strength of Exterior RC Beam-Column Joints Using Headed Bars. In Proceedings of the 4th Congrès International de Géotechnique - Ouvrages -Structures (pp. 829–839). Springer, Singapore.

CIGOS 2017

16

Bui, Q.-B., Sentosa, B., & Duong, T.-H. (2017). A Numerical Modeling of RC Beam-Column Joints Compared to Experimental Results. In Proceedings of the 4th Congrès International de Géotechnique - Ouvrages -Structures (pp. 59–67). Springer, Singapore.

CIGOS 2017

17

Sentosa, B., Bui, Q.-B., Plassiard, J.-P., Plé, O., Perrotin, P., & Purnomo, H. (2017). Redistribution of Moment at Beam-Column Joints in RC Structures: Comparison Between an Experimental Study and Eurocode 2. In Proceedings of the 4th Congrès International de Géotechnique - Ouvrages -Structures (pp. 233–242). Springer, Singapore.

CIGOS 2017

18

Bui, Q.-B., Prud’homme, E., Grillet, A.-C., & Prime, N. (2017). An Experimental Study on Earthen Materials Stabilized by Geopolymer. In Proceedings of the 4th Congrès International de Géotechnique - Ouvrages -Structures (pp. 319–328). Springer, Singapore.

CIGOS 2017

19

Bui Q-BAssessing the rebound hammer test for rammed earth material”, Sustainability.

ISI (10/2017)

20

Hoang, D.-Q., Tran, M.-T., Cao, X.-H., & Ngo, D.-T. (2017). The effect of edge-roughness of magnetic nanowires on the degree of asymmetry in transverse domain walls. RSC Advances.

ISI (10/2017)

21

Van Do, V. N., & Thai, C. H. (2017). Thermal buckling analyses of FGM sandwich plates using the improved radial point interpolation mesh-free method. Composite Structures.

ISI (10/2017)

22

Van Do, V. N., Ong, H.T. & Thai, C. H. (2017), Dynamic responses of Euler–Bernoulli beam subjected to moving vehicles using isogeometric approach. Applied Mathematical Modelling.

ISI (11/2017)

23

Le, D.-H., Sheen, Y.-N., & Bui, Q.-B. (2017). An assessment on volume stabilization of mortar with stainless steel slag sand. Construction and Building Materials.

ISI (11/2017)

24

Phan, V. T.-A. (2017). Improvement in Engineering Properties of Mudstone in Southwestern Taiwan Through Compaction and a Cement Additive. Geotechnical and Geological Engineering.

ISI (12/2017)

2016

1

Muhammad, N., Hadi, S., & Tran, T. M. (2016). Seismic rehabilitation of reinforced concrete beam-column joints by bonding with concrete covers and wrapping with FRP composites. Materials and Structures.

ISI

2

Hsiao, D. H., & Phan, V. T. A. (2016). Evaluation of static and dynamic properties of sand–fines mixtures through the state and equivalent state parameters. Soil Dynamics and Earthquake Engineering.

ISI

3

Hsiao, D. H., Phan, V. T. A., & Huang, C. C. (2016). An experimental investigation on dynamic properties of various grouted sands. Geomechanics and Engineering.

ISI

4

Lee, C. H., Chang, K. H., & Van Do, V. N. (2016). Numerical investigation on the ratcheting behavior of pressurized stainless steel pipes under cyclic in-plane bending. Marine Structures.

ISI

5

Thai, C. H., Do, V. N., & Nguyen-Xuan, H. (2016). An improved Moving Kriging-based meshfree method for static, dynamic and buckling analyses of functionally graded isotropic and sandwich plates. Engineering Analysis with Boundary Elements.

ISI

6

Lee, C. H., Chang, K. H., & Van Do, V. N. (2016). Modeling the high cycle fatigue behavior of T-joint fillet welds considering weld-induced residual stresses based on continuum damage mechanics. Engineering Structures.

ISI

7

Bui, T. T., Bui, Q. B., Limam, A., & Morel, J. C. (2016). Modeling rammed earth wall using discrete element method. Continuum Mechanics and Thermodynamics.

ISI

8

Phan-Dao, H. H., Thai, C. H., Lee, J., & Nguyen-Xuan, H. (2016). Analysis of laminated composite and sandwich plate structures using generalized layerwise HSDT and improved meshfree radial point interpolation method. Aerospace Science and Technology.

ISI

9

Vu-Bac, N., Lahmer, T., Zhuang, X., Nguyen-Thoi, T., & Rabczuk, T. (2016). A software framework for probabilistic sensitivity analysis for computationally expensive models. Advances in Engineering Software.

ISI

10

Vu-Bac, N., Areias, P. M. A., & Rabczuk, T. (2016). A multiscale multisurface constitutive model for the thermo-plastic behavior of polyethylene. Polymer.

ISI

11

Areias, P., Vu-Bac, N. & Rabczuk, T. Int J Mech Mater Des (2016). A multisurface constitutive model for highly cross-linked polymers with yield data obtained from molecular dynamics simulations. International Journal of Mechanics and Materials in Design.

ISI

12

Ngo, N. T., & Tung, T. M. (2016). Coupled discrete-continuum method for studying load-deformation of a stone column reinforces rail track embankments. Procedia Engineering.

CUTE 2016

13

Pham, T. M., Youssed, J., Hadi, M. N., & Tran, T. M. (2016). Effect of different FRP wrapping arrangements on the confinement mechanism. Procedia Engineering.

CUTE 2016

14

Tran, M. T. (2016). Influence factors for the shear strength of exterior and interior reinforced concrete beam-column joints. Procedia Engineering.

CUTE 2016

15

Sheen, Y. N., Huang, L. J., Sun, T. H., & Le, D. H. (2016). Engineering Properties of Self-compacting Concrete Containing Stainless Steel Slags. Procedia Engineering.

CUTE 2016

16

Le, D. H., & Nguyen, K. H. (2016). An Assessment of Eco-Friendly Controlled Low-Strength Material. Procedia Engineering.

CUTE 2016

17

Li-Jeng, H., Her-Yung, W., Yeong-Nain, S., & Duc-Hien, L. (2016). Earth Pressure and Settlement Analysis of Trench Ducts Backfilled with Controlled Low Strength Materials. Procedia Engineering.

CUTE 2016

18

Phan, V. T. A., Hsiao, D. H., & Nguyen, P. T. L. (2016). Critical state line and state parameter of sand-fines mixtures. Procedia Engineering.

CUTE 2016

19

Phan, V. T. A., Hsiao, D. H., & Nguyen, P. T. L. (2016). Effects of Fines Contents on Engineering Properties of Sand-Fines Mixtures. Procedia Engineering.

CUTE 2016

20

Van Do, V. N. (2016). The Behavior of Ductile Damage Model on Steel Structure Failure. Procedia Engineering.

CUTE 2016

21

Phan-Dao, H. H. (2016). A Meshfree Radial Point Interpolation Method for Free Vibration of Laminated Composite Plates Analysis Based on Layerwise Theory. Procedia Engineering.

CUTE 2016

22

Le, T. Q., & Nurhidayati, Z. A. (2016). A Study of Motorcycle Lane Design in Some Asian Countries. Procedia Engineering.

CUTE 2016

23

Ke, T. N., & Khanh, H. N. P. (2016). Determine Load Capacity of Pressed Piles Using ζ Method. Procedia Engineering.

CUTE 2016

24

Ngo, L. M. (2016). Design Transformation for the Sustainability of High-rise Residential Buildings. Procedia Engineering.

CUTE 2016

25

Ngo, L. M., & Trinh, T. A. (2016). A University-city Complex, a Model for Sustainable Development: A Case Study in Vietnam. Procedia Engineering.

CUTE 2016

26

Trinh, T. A., & Le, T. P. L. (2016). Motorcycle Helmet Usage among Children Passengers: Role of Parents as Promoter. Procedia Engineering.

CUTE 2016

27

Trinh, T. A., & Vo, T. T. A. (2016). Evaluating the powerful prediction of integrated behavioral model for risky road behaviors. Procedia Engineering.

CUTE 2016

28

Le, T. P. L., & Trinh, T. A. (2016). Encouraging public transport use to reduce traffic congestion and air pollutant: a case study of Ho Chi Minh City, Vietnam. Procedia Engineering.

CUTE 2016

29

Nguyen, Q. T. (2016). The Main Causes of Land Subsidence in Ho Chi Minh City. Procedia Engineering.

CUTE 2016

30

Trinh, T. A., & Vo, T. T. A. (2015). Motorbike Driver's Decision Models for Drinking and Driving Behavior. Journal of the Eastern Asia Society for Transportation Studies.

EASTS 2015

31

Trinh, T. A., Le, T. P. L., & Tran, T. Q. M. (2015). Assessment of Sustainable Ecotourism Development: A Case Study of Gao Giong Ecotourism Park, Vietnam. In Proceedings of the Eastern Asia Society for Transportation Studies.

EASTS 2015

2015

1

Pham, T. M., Hadi, M. N., & Tran, T. M. (2015). Maximum usable strain of FRP-confined concrete. Construction and Building Materials.

ISI

2

Hsiao, D. H., Phan, V. T. A., Hsieh, Y. T., & Kuo, H. Y. (2015). Engineering behavior and correlated parameters from obtained results of sand–silt mixtures. Soil Dynamics and Earthquake Engineering.

ISI

3

Lee, C. H., Chang, K. H., & Van Do, V. N. (2015). Finite element modeling of residual stress relaxation in steel butt welds under cyclic loading. Engineering Structures.

ISI

4

Van Do, V. N., Lee, C. H., & Chang, K. H. (2015). A constitutive model for uniaxial/multiaxial ratcheting behavior of a duplex stainless steel. Materials & Design.

ISI

5

Shin, H. S., Park, K. T., Lee, C. H., Chang, K. H., & Van Do, V. N. (2015). Low temperature impact toughness of structural steel welds with different welding processes. KSCE Journal of Civil Engineering.

ISI

6

Van Do, V. N., Lee, C. H., & Chang, K. H. (2015). High cycle fatigue analysis in presence of residual stresses by using a continuum damage mechanics model. International Journal of Fatigue.

ISI

7

Hamdia, K. M., Msekh, M. A., Silani, M., Vu-Bac, N., Zhuang, X., Nguyen-Thoi, T., & Rabczuk, T. (2015). Uncertainty quantification of the fracture properties of polymeric nanocomposites based on phase field modeling. Composite Structures.

ISI

8

Vu-Bac, N., Bessa, M. A., Rabczuk, T., & Liu, W. K. (2015). A multiscale model for the quasi-static thermo-plastic behavior of highly cross-linked glassy polymers. Macromolecules.

ISI

9

Vu-Bac, N., Silani, M., Lahmer, T., Zhuang, X., & Rabczuk, T. (2015). A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites. Computational Materials Science.

ISI

10

Vu-Bac, N., Rafiee, R., Zhuang, X., Lahmer, T., & Rabczuk, T. (2015). Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters. Composites Part B: Engineering.

ISI

2014

1

Hadi, M. N., & Tran, T. M. (2014). Retrofitting nonseismically detailed exterior beam–column joints using concrete covers together with CFRP jacket. Construction and Building Materials.

ISI

2

Tran, T., Hadi, M. N., & Pham, T. M. (2014). A new empirical model for shear strength of reinforced concrete beam-column connections.

ISI

3

Sheen, Y. N., Huang, L. J., Wang, H. Y., & Le, D. H. (2014). Experimental study and strength formulation of soil-based controlled low-strength material containing stainless steel reducing slag. Construction and Building Materials.

ISI

4

Hsiao, D. H., & Phan, T. A. V. (2014). Effects of silt contents on the static and dynamic properties of sand-silt mixtures. Geomechanic and Engineering.

ISI

5

Lee, C. H., Van Do, V. N., & Chang, K. H. (2014). Analysis of uniaxial ratcheting behavior and cyclic mean stress relaxation of a duplex stainless steel. International Journal of Plasticity.

ISI

6

Vu-Bac, N., Lahmer, T., Keitel, H., Zhao, J., Zhuang, X., & Rabczuk, T. (2014). Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations. Mechanics of Materials.

ISI

7

Bui, Q. B., & Morel, J. C. (2014). First exploratory study on the ageing of rammed earth material. Materials.

ISI

8

Bui, Q. B., Morel, J. C., Hans, S., & Walker, P. (2014). Effect of moisture content on the mechanical characteristics of rammed earth. Construction and Building materials.

ISI

9

Bui, T. T., Bui, Q. B., Limam, A., & Maximilien, S. (2014). Failure of rammed earth walls: from observations to quantifications. Construction and Building Materials.

ISI

10

Bui, T. T., Limam, A., & Bui, Q. B. (2014). Characterisation of vibration and damage in masonry structures: experimental and numerical analysis. European Journal of Environmental and Civil Engineering.

ISI

11

Bui, Q. B., Mommessin, M., Perrotin, P., Plassiard, J. P., & Plé, O. (2014). Assessing local-scale damage in reinforced concrete frame structures using dynamic measurements. Engineering Structures.

ISI

12

Huang, L. J., Sheen, Y. N., & Le, D. H. (2014). On the multiple linear regression and artificial neural networks for strength prediction of soil-based controlled low-strength material. In Applied Mechanics and Materials.

Scopus

13

Sheen, Y. N., Huang, L. J., & Le, D. H. (2014). Engineering properties of controlled low-strength material made with residual soil and Class F fly ash. In Applied Mechanics and Materials.

Scopus

14

Bui, Q. B., Hans, S., & Boutin, C. (2014). Dynamic behaviour of an asymmetric building: experimental and numerical studies. Case Studies in Nondestructive Testing and Evaluation.

Scopus

15

Vu-Bac, N., Lahmer, T., Zhang, Y., Zhuang, X., & Rabczuk, T. (2014). Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs). Composites Part B: Engineering.

Scopus

2013

1

Sheen, N. Y., Huang, J. L., & Le, D. H. (2013). Predicting strength development of RMSM using ultrasonic pulse velocity and artificial neural network. Computers and Concrete.

ISI

2

Sheen, Y. N., Wang, H. Y., Juang, Y. P., & Le, D. H. (2013). Assessment on the engineering properties of ready-mixed concrete using recycled aggregates. Construction and Building Materials.

ISI

3

Sheen, Y. N., Zhang, L. H., & Le, D. H. (2013). Engineering properties of soil-based controlled low-strength materials as slag partially substitutes to Portland cement. Construction and Building Materials.

ISI

4

Phan-Dao, H. H., Nguyen-Xuan, H., Thai-Hoang, C., Nguyen-Thoi, T., & Rabczuk, T. (2013). An edge-based smoothed finite element method for analysis of laminated composite plates. International Journal of Computational Methods.

ISI

5

Vu-Bac, N., Nguyen-Xuan, H., Chen, L., Lee, C. K., Zi, G., Zhuang, X., ... & Rabczuk, T. (2013). A phantom-node method with edge-based strain smoothing for linear elastic fracture mechanics. Journal of Applied Mathematics.

Scopus